Computer To Screen (CTS) Machine For Textile Clothing Printing DMD Tech No Filme

CTS100 Computer to screen (CTS) machine is mainly for screen making in the textile printing industry. Its precision is 1270 or 2540 dpi, and the maximum screen size is 900x1000 mm. The focusing mode is dynamic focusing, and the production capacity can reach 120 S/m2 (according to the characteristics of photoresist). Because of its unique high performance and equipment flexibility, CTS100 is extremely suitable for screen making in the printing industry, and has become the preferred plate making product for many textile printing enterprises.

Max Screen Size 900*1000 Computer To Screen machine

• HIWIN high precision guide rail,linear electric motor,Renishaw gratng ruler;
• Up to 120 line;Image 1270dpi;
• DMD exposure system;
• Integrated high strength steel structure

Advantages

1. According to customer requirements, CTS machine can be configured with suitable lens 1.95X (higher accuracy), 2.052X.
2. GIS develops our own the 405nm coupled laser and laser imaging system to increase laser utilization rate from 30% to 50%.
3. CTS machine can present the minimum of 50 μm line width and 5% dots on the screen.
4. CTS machine adopts HIWIN SP class guide rail, linear motor, Renishaw grating ruler, marble bed body to ensure the stability of our equipment.
5. Our sales and service teams are all over the world. With the support of top technicians, we are committed to solving problems and malfunction in the sales process. We maximize the value of the equipments used.

The maximum screen frame size can reach 900x1000.

High Precision:
Resolutions 1270dpi or 2540dpi, with raster 133lpi/dpi (halftones printing)

High Efficiency:
3 minutes to finish the exposure on screen size 1000mm*1000mm. Stencil making efficieny has been greatly improved due to a lot of time is saved by the accurate exposure alignment and lobor reduction.

Low Cost:
Elimination of film positives. Litho film are becoming increasingly expensive and the number of suppliers on the maket is rapidly decreasing. 1 procedure of CTS digital screen making to replace 5 procedures of from the conventional process

Jiangsu GIS Laser Technologies Inc. (hereafter referred to as GIS Laser) is a subsidiary of GIS Tech Inc. which is a multinational company providing advanced intelligent solutions into the industries of New Energy, Semiconductor Packaging, Lithium Battery, PCB and Printing, with its incredible innovation. through its independent Next Tech Research Institute, Business Division and Manufacturing Plant.

Our mission is to be a professional supplier in product solutions and services, striving for sustainable optimization and innovation in manufacturing capabilities for customers.

Our values are following with innovation, humility, perseverance, commitment.

GIS Tech has a strong professional R&D and after sales team with over 30 years experiences to enable the annual production output to be over 500 units, based on its professional manufacturing management SOP process through 10,000 square meter manufacturing center in Xuzhou city, Jiangsu province.

GIS Tech is the pioneer in introducing the DLP Technology into the laser imaging applications, owning the whole independent intellectual properties in the technologies of data processing, data transmission, sub-graph, electronic control, board card control, laser and optical lens etc. Our main products are CTS series (Computer to Screen system), CTP (Computer to Plate system) and fully automatic printing plate developing system.

GIS Tech is prepared to meet with new challenges in funding, technology, teams, applications, services, supply chains in the new future.

http://www.gis-group.com.cn/en/