Max Screen Size 1000*1100 Computer To Screen CTS For Textile Laser
Direct Exposure Machine For Decal
CTS laser direct plate making machine is to directly read computer
data files and convert them into images, and then expose and image
them on the screen by laser projection. This kind of imaging screen
is suitable for textile printing, and also suitable for decals,
packaging, PCB, 3C Printing on glass covers, etc.
The laser direct exposure machine introduces digital optical
processing (DLP) technology into the field of screen imaging, using
DLP laser direct imaging technology to replace the traditional film
or mask exposure mode, and is equipped with HIWINSP-level guide
rails and linear motor Renishaw gratings. Marble base, etc., to
ensure the stability of the machine.
Simple and simple laser direct plate making system-CTS laser direct
plate making system and traditional silk screen plate making
complete process, can directly read the format of 1-bit tiff data
files, convert them into images and use laser head projection for
exposure imaging, fine craftsmanship and traditional craftsmanship
are complete Production, suitable for printing, decals, packaging,
PCB, labels and signs, automotive glass, home appliance glass,
electronic glass, decoration and other screen printing industries.
GIS Tech Inc.
GIS Tech is the pioneer in introducing the DLP Technology into the
laser imaging applications, owning the whole independent
intellectual properties in the technologies of data processing,
data transmission, sub-graph, electronic control, board card
control, laser and optical lens etc. Our main products are CTS
series (Computer to Screen system), CTP (Computer to Plate system)
and fully automatic printing plate developing system.
Specification / Model | CTS200 |
| Max screen size ( mm ) | 1000x1100 |
| Min screen size ( mm ) | 400x400 |
Max exposure size ( mm ) | 900x1000 |
Screen frame thickness
(bespoke service is available) | 25-45mm |
| Imaging System | DMD DLP Technology |
| Emulsion thickness (EOM) | Solvent resistant emulsion 3μm-150μm, water resistant emulsion 3μm-
350μm |
| Exposure time | 120-240s/ ㎡, #350 yellow mesh |
| Resolution | 2540dpi (Optional) |
| Raster | 133LPI |
| Focus system | Fixed focusing |
| File format | 1_bit tiff etc. |
| Laser type | UV laser, wavelength 405±5nm |
| Laser power | 20W/25W(Optional) |
| Equipment size (mm) | 2700x1550x1600 |
| Equipment net weight | 1100KG |
| Conditions | Yellow light room with cleanliness Class 10000, temperature 22±2°C,
40-70% relative humidity (No condensation) |
| Power | Single phase 220v, 50/60HZ, 4KW, gas 1L/min |
High Precision:
Resolutions 2540dpi, with raster 133lpi/dpi (halftones printing)
High Efficiency:
3 minutes to finish the exposure on screen size 1000mm*1000mm.
Stencil making efficieny has been greatly improved due to a lot of
time is saved by the accurate exposure alignment and lobor
reduction.
Low Cost:
Elimination of film positives. Litho film are becoming increasingly
expensive and the number of suppliers on the maket is rapidly
decreasing. 1 procedure of CTS digital screen making to replace 5
procedures of from the conventional process
